Home
>
products
>
Flexographic Plate Mounting Tapes
>
|
|
| Place of Origin | Guangdong, China |
| Brand Name | Yihong |
| Model Number | Flexographic Plate Mounting Tapes |
Eco-friendly Printing Plate Mounting Tape
| Product Name | Eco-friendly Printing Plate Mounting Tape Natural Rubber Type Flexo Mounting Tape Hot Melt Printing Double-Sided Adhesive Tape Flexo-Printing Double-Sided Tape |
| Low/Medium High/Ultra High Temperature | 0°C/40°C/60°C |
| Long-term Temperature Resistance | 38-40°C |
| Short-term Temperature Resistance | 80°C |
| Peeling | >1.8kg/in (test method PSTC-1) |
| Stickiness | >24hr/in (test method PSTC-7) |
| Shelf Life | 3 years |
| Payment terms | 30% T/T deposit in advance The balance is in accordance with the copy of bill of lading and letter of credit. |
| Port of Shipment | FOB Shenzhen |
| Sample | Free |
| Sample lead time | 1-3 working days |
Please be advised: The above information is provided based on our real experimental data, professional knowledge and past experience.
Due to differences in actual use scenarios and application conditions, we sincerely recommend that reaching out our experiment and pre-sales representatives before placing any order, try our samples first and see if it meets your requirements, then we move to next step after confirming the final satisfactory product.
We have right to modify the above content according to the certain situation.
Primarily used in the printing industry, it is specially designed for photosensitive resin,rubber plate reprinting cylinder or sleeve fixing.
It is very convenient and helps to improve production efficiency.
(1) The temperature has a great influence on the use of the plate-mounting tape, so all operations on the plate-mounting tape should be carried out at room temperature to avoid affecting the bonding force of the plate-mounting tape due to temperature.
(2) Before the plate is pasted, the surface of the printing plate and the plate cylinder (or plate mounting sleeve) should be kept clean. This is because dust, rust, ink and other dirt will affect the adhesive force of the plate-mounting tape, resulting in poor adhesion of the printing plate and warping of the plate. Strong alcohols should be used when cleaning plates and sleeves, as other chemical solvents may corrode the plates and sleeves.
(3) When attaching the plate, the area of the plate-mounting tape should be wider than the area of the printing plate, which can greatly reduce the risk of plate warping.
(4) When attaching the plate, the interface of the printing plate should avoid the interface of the plate-mounting tape, otherwise it is easy to cause problems of being warped or fall off.
(5) When pasting the plate-mounting tape on the surface of the printing plate cylinder or the plate-mounting sleeve, it is recommended to use a scraper instead hand.
(6) After the printing plate is pasted, in order to prevent the ink and solvent from contacting the adhesive on the edge of the printing plate during printing and cleaning, thereby affecting the stickiness of the plate-mounting tape, a circle of edge-sealing tape should be pasted around the printing plate. In this way, it can also avoid warping of the printing plate.
(7) When unloading the plate, it is recommended to unload the printing plate slowly and smoothly at an angle of less than 90° (the tangent angle between the printing plate and the printing plate cylinder or the surface of the plate sleeve), so as to avoid the printing plate wrinkling or rupture.
FAQ
1. Due to the market prices fluctuate frequently, please be sure to contact pre-sales representatives to get the latest quotations;
2. Due to the differences in the carrier/base material of the adhesive tape, coating glue thickness, thickness of paper or plastic core, manual measurement methods and etc., there is a certain difference in the size and weight of each roll of adhesive tape, but normally will keep the difference less than 1-2 mm. Should you have any questions, please feel free to contact customer service;
3. Due to the raw materials used by the suppliers is not 100% exactly the same every time, there may be slightly differences in the color of the same double-sided tape. We will fully communicate with customers before sales, and adjust the most according to the order quantity and raw material inventory. We will make the production plan appropriately, try our best to minimize the differences for the products of the same batch of orders;
4. Please confirm whether the product quantity is correct and the packaging is intact when receiving the goods, and sign for receipt after inspection. If you have any questions, please contact us in time, we will be dealing with it immediately;
5. The customized product is not returnable expect the quality problems. If you are satisfied with our products and services, please comments us with full marks and praise. We will definitely develop faster and better with your support.
Contact Us at Any Time
